1. Offense/Defense
  2. LaundryPro
  3. Overtime

shop offense/defensewatch the video

MACHINE WASH INSTRUCTIONS:
  1. Follow cleaning instructions on apparel label. Use warm or cold water.
  2. Pour 3 oz of Offense in the detergent receptacle of your washing machine in conjunction with 3 oz of Defense in the fabric softener receptacle of your washing machine. Wash as normal.
  3. Air dry or dry in dryer.
*Recommend using low-heat setting on dryer or shoe rack to dry
*Defense can also be used as a booster for LaundryPro

HAND WASH INSTRUCTIONS:

Offense

  1. Mix 2 ounces of Offense per gallon of water in container.
  2. Submerge item in solution, agitate, and aggressively scrub with a brush as needed.
  3. Allow to remain submerged for at least 2 minutes.
  4. Squeeze out excess solution.
  5. For long-lasting odor protection, immediately treat item using OdorBalance Defense.
*wash or rinse off soil prior to treatment
*test for color-fastness prior to use
*make a new wash when water turns very brown

Defense

  1. Mix 2 oz. of Defense per gallon of water in container.
  2. Submerge articles in solution, squeeze, and agitate to saturate completely.
  3. Allow to remain submerged for at least 2 minutes.
  4. Squeeze out excess solution.
  5. Air dry or dry in dryer.
*Recommend using low-heat setting on dryer or shoe rack to dry

shop laundryprowatch the video

MACHINE WASH INSTRUCTIONS:

For best results follow cleaning instructions on textile label. Odor control is most effective if textiles are washed with LaundryPro prior to first use. Use regularly to maintain. Gently shake bag and fill according to load size (see below). Add to washing machine detergent dispenser. Use warm or cold water.

Small Load (3-8 lbs)
1 oz (1/2 scoop)
Regular Load (8-13 lbs)
2 oz (1 scoop)

NOTE:
OdorBalance Defense may be used to boost effectiveness of LaundryPro by adding 2 oz in the fabric softener/rinse cycle dispenser of washing machine.

shop overtimewatch the video

SPRAY INSTRUCTIONS:
  1. Shake bottle.
  2. Holding spray bottle 4” to 6” from surface, apply liberally making sure all surfaces are completely covered.*
  3. Let dry.
  4. Reapply regularly to keep odor away.
*Porous materials will require heavier application.